SL03 Plastic Repair Coating
SL03 Plastic Coating is formulated with nano-coating technology that quickly removes oxides from the surface of plastics and binds to the pores of unpainted plastic trim while forming a nano-ceramic coating on the surface.
The special formulation creates a smooth coating with extremely high surface tension, which reflects and blocks UV rays from sunlight, preventing them from damaging the interior of plastic products.
The coating is also hydrophobic, i.e. it repels and adsorbs water. It stays intact even in the rain or car wash. It is an oil-free solution that does not leave a greasy or sticky residue and therefore does not attract dust or other particles.
SL03 plastic coating for cars can be used on bumpers, mirror housing , door handles, vinyl rooftops, as well as interior trim so long as it’s plastic. The effect lasts up to 1 year after application.
SL03 Plastic repair coating (50 ml)
Microfiber cloth (1 pc.)
Coating applicator
Application cloth
Gloves (1 pair)
Application manual
A true restorer：
Removes oxides from plastic surfaces and restores aged and faded plastic, rubber and vinyl parts.Ongoing Protection：
SL03 forms a strong nano-protective layer on surfaces to protect them from future UV rays, rain and dirt.Long-lasting effect：
For most cars, you only need 6-10ml per application and the effect of a single layer can last up to a year.
Bumpers
Mirror housings
Door handles
Vinyl Roof
Interior Trim
HOW
TO
USE
？
1. Thoroughly clean the plastic surface to remove dirt and grease and wait for air drying.
2. Place a small amount of SL03 coating drops on an applicator or microfiber cloth and apply evenly to the plastic parts.
3. Wait for the coating to dry for ten minutes (or longer if the temperature is low and the latter humidity is high) and gently wipe with a clean towel to remove excess coating.
4. Do not contact water for 12 hours after application.
CAUTION!
Do not apply the coating on matte surfaces or direct sunlight.
Proper application temperature range: +10 °C to +25 °C.
Do not coat if temperature is more than +30 °C.
Upon finishing applying the coating, polish it by using microfiber cloth.
Ensure there are no spots left unpolished.
Other Products
GS02 GRAPHENE SPRAY COATING
More convenient graphene spray coating
LIQUID DIAMOND COATING
Incredible gloss and stain resistance
NC05 NANO CERAMIC COATING
Better quality nano ceramic coating
DM03 GRAPHENE COATING
Top grade graphene coating
