Wheel Rim Protection
After the engine compartment and the exhaust pipe, wheels are the most susceptible component to temperature cycling and these surfaces are exposed to rapid changes in temperature range.
These surfaces are exposed to rapid changes in temperature ranges, and Sliaco’s Wheel Rim Protection offers durability to over 800 degrees Celsius without destroying its original properties.
Wheel Rim Protection is only 1 layer thick, but if you want to extend its durability, the product can be applied in layers. Keep at least 1 hour between layers. The coating can be applied to all finishes of smooth and matte rims.
Wheel Rim Protection (50 ml)
Microfiber cloth (1 pc.)
Coating applicator
Application cloth
Gloves (1 pair)
Application manual
Wheel rim
Chrome Strip
Car Logo
HOW
TO
USE
？
1. Clean Wheel Rim thoroughly, special wheel cleaner is recommended.
2. Shake Wheel Rim Protection well and drop onto an application sponge.
3. Apply the product evenly on the wheel rims, crevices and narrow places can be applied with a microfiber cloth.
4. Wait for curing for about 5 minutes or so, use microfiber towel to polish (be careful not to apply too much pressure to wipe)
5.It takes about 24 hours to fully cure, do not touch water and car wash before the period.
CAUTION!
Do not apply the coating on matte surfaces or direct sunlight.
Proper application temperature range: +10 °C to +25 °C.
Do not coat if temperature is more than +30 °C.
Upon finishing applying the coating, polish it by using microfiber cloth.
Ensure there are no spots left unpolished.
Other Products
SL03 PLASTIC REPAIR COATING
For the repair and protection of automotive plastics
LIQUID DIAMOND COATING
Incredible gloss and stain resistance
NC05 NANO CERAMIC COATING
Better quality nano ceramic coating
DM03 GRAPHENE COATING
Top grade graphene coating
