Liquid Diamond Coating
Liquid Diamond Coating is a new protective coating for automotive paintwork that is 15 times stronger than other coatings, and is the only coating that offers pure strength, brightness and depth correction.
Liquid Diamond Coating not only offers high gloss, hardness and corrosion resistance, but also has excellent self-cleaning properties, reducing the adhesion of dust to the paintwork.
Liquid Diamond Coating is also particularly suitable for refurbishing old car paintwork, restoring gloss without polishing the vehicle and repairing swirl lines. It can improve the appearance of old cars by 60-90%.
Liquid Diamond Coating (200 ml)
Microfiber Towel (2 pcs)
Gloves (1 pair)
Application manual
Enhanced With Ultra-Refined Graphene Resins：
Utilizes an All New Innovative Reduced Graphene Oxide (rGO) resins that bonds to the surface, forming an impenetrable layer of protection.Hydrophobic Nanotechnology：
Graphene nanotechnology repels dust, dirt, and contaminants. Improved resistance from scratches, water spots, staining, and etching.5+ Years of Protection：
Durability rated in years, not months. Once applied, this coating forms a permanent bond to the surface providing exceptional long-term protection.Incredible Gloss, Shine, and Slickness：
The nanoparticle Graphene layer leaves a stunningly rich, deepened gloss that drastically enhances the look and shine of your paint.
Car paint surface
Window glass (excluding windshield)
Wheel rim
HOW
TO
USE
？
Prep Application
Step 1: Use neutral car wash to thoroughly clean the paint surface, and air dry in a dust-free indoor environment.
Step 2: Use a degreaser to degrease the entire car paint surface, and there is no need to wash the car after degreasing.
Application steps
Step 1: Fold the special towel three times and hold the mouth of the towel with your hand.
Step 2: Pour the product onto the towel and wet it thoroughly, then start from the edge of one side and keep dragging it all the way to the edge of the other side, taking care not to stop in the middle and not to repeat the application.
Step 3: After five minutes the surface will begin to set and if there is dust on the finish after that it should not be wiped off.
Step 4: If any smear marks or grit are found, remove immediately with a degreaser. If more than 30 minutes have elapsed it can only be removed by polishing.
CAUTION!
Do not apply back and forth repeatedly. If obvious marks are found during the construction process, immediately wipe the entire surface with degreaser and operate again.
Please work in a dry garage or indoor area. After the construction is completed, let the vehicle stand and air dry naturally for about 12 hours.
For optimal results, please do not wash the car or rinse with water within one week after construction. Do not rub the paint surface. If water accidentally enters, please quickly dry it gently with a dry towel or tissue.
Before washing the car, you can use your nails to scratch an inconspicuous area on the surface of the car paint to determine whether it has completely cured. After confirming complete curing wash the car.
Only for original car paint (not for baking/painting), do not use on other surfaces.
Do not workin damp weather or places with high humidity, otherwise the paint surface may turn white.
Other Products
SL03 PLASTIC REPAIR COATING
For the repair and protection of automotive plastics
GS02 GRAPHENE SPRAY COATING
More convenient graphene spray coating
NC05 NANO CERAMIC COATING
Better quality nano ceramic coating
DM03 GRAPHENE COATING
Top grade graphene coating
